Denon DHT-1312XP User Manual

30
Surround mode
Audio Adjust
Tone
RESTORER z7
AFDM z6
SB CH OUT Subwoofer
PRO LOGIC g/gx Music mode only
NEO:6 Music mode only
Panorama Dimension Center Width Center Image
DIRECT (2 channel)
S
z2
DIRECT (Multi-channel) STEREO
S S
MULTI CH IN
S S S
DOLBY PRO LOGIC gx S S S S S S DOLBY PRO LOGIC g S S S S S S DTS NEO:6
S S S S
DOLBY DIGITAL
S S S
DOLBY DIGITAL Plus
S S S
DOLBY TrueHD
S S
DTS SURROUND
S S S
DTS 96/24
S S S
DTS-HD
S S
DTS Express
S S S
MULTI CH STEREO
S S S
VIRTUAL
S S
z2 Only when “SW Mode” is set to “LFE+Main” (“Bass Setting”), sound is output from the subwoofer. z6 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played. z7 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.

Denon DHT-1312XP Specifications

General

Product color	Black
Volume control	Rotary
RMS rated power	110 W
Recommended usage	Home theatre
Remotely operated	Yes
Audio output channels	5.1 channels
Amplification device type	AV receiver
Amplifier frequency range	10 - 100000 Hz
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	0.08 %
Amplification device form factor	Stand-alone
Amplifier dimensions (W x D x H)	434 x 382 x 162 mm
Satellite speaker type	-
Satellite speaker weight	800 g
Number of satellite speakers	2
Satellite speakers RMS power	- W
Satellite speaker frequency range	150 - 20000 Hz
Satellite speaker dimensions (WxDxH)	105 x 150 x 200 mm
Center speaker dimensions (WxDxH)	200 x 150 x 105 mm
Subwoofer weight	11000 g
Subwoofer frequency range	35 - 150 Hz
Subwoofer dimensions (WxDxH)	250 x 420 x 387 mm
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Headphone outputs	1

Weight and Dimensions

Set weight	8900 g