Denon DN-500AV - IP Control (Ethernet)

90
IP Control (Ethernet)
You will be able to perform the three control functions from the host by connecting an Ethernet cable to
theethernetconnector(Connectortype:RJ-45(10BASE-T/100BASE-TX).
nCommunication format
•Communication system: A full duplex
•Communicationspeed:10Mbps/100Mbps
•Communication port: TCP port 23 (telnet)
•Communication data length: 135 bytes (maximum)
nConnections
Connecting the unit and host directly
Host
Ethernet cross
cable
Connecting the unit and host via a hub
Host
Ethernet
straight cable
Ethernet
straight cable
Hub
Basic version
Advanced version
InformationInformation
BD