Denon DN-D4500MK2 - How to Adjust the Various Preset Settings; Preset Function; Preset Menu Map

25
Getting started Connection
Playback
Troubleshooting Specifications Index
Others Preset
Preset function
Preset menu map
Setting items Description
Auto Cue Sets the detection level of the sound start point when ignoring the soundless part at
the head of a track at playback.
(A.CUEON*/A.CUEOFF)
Brake Time Setting the track end time
(STEP1/STEP2*/STEP3/STEP4)
Auto Close Time for automatically closing disc holder.
(CloseOFF/Close10s/Close30s*/Close1min)
Jump Time SelectthejumptimeofQuickJump.
(Jump10sec*/Jump20sec/Jump30sec/Jump1min)
P. Range Select the playing pitch range when the power is turned on.
(4%Range/10%Range*/16%Range/24%Range)
EOM Time Sets the notification for the time remaining until the end of the track being played back.
(EOMOFF/EOM10sec*/EOM15sec/EOM20sec/EOM30sec/EOM60sec/
EOM 90 sec)
Fader Mode Switches the operation for fader start for the mixer connected to this unit.
Select 1-line (TS) type cable (Play and Pause).
Select 2-line (TRS) type cable (CUE and Play)
(Play/CUE*/PlayPause)
Power Play Switches power on playback on or off.
Playback starts when the power is turned on if a disc is loaded.
(P.PlayON/P.PlayOFF*)
Pitch Select the pitch mode when the power is turned on.
(PitchON*/Key.AdjON(KEYADJUSTON)/PitchOFF)
Play Mode Select the play mode when the power is turned on.
(Single/Cont./PlayLock*)
Time Mode Select the time mode when the power is turned on.
(Elapsed*/Remain)
Bpm Disp Select the BPM display
(DispON*/DispOFF)
Relay Mode Switches relay playback on or off.
(RelayON/RelayOFF*)
Relay Time Select the crossover time the currently playing track when the opposite drive start to
play with the Relay Play function.
(RelayOsec*/Relay1sec/Relay2sec/Relay3sec)
Setting items Description
MemoClear MemoClear(MEMOALLCLEAR)
NOTE: This PRESET item can be only performed in CD1 (left side) of the remote
controller.
Clear all MEMO data in the non-volatile memory.
q To clear all MEMO data, press the
SEL. down.
“Clear OK?” flashes on the character display.
w Press the TRACK SEL. down again and select “OK” to execute clearing all MEMO
data.
“Memo Clear” is displayed on the character display while clearing.
e Onceclearingiscompleted,“Complete!”isdisplayed.
Version No The DN-D4500MK2’s software version is displayed.
(SYSTEM/DSP/SER/RC)
Preset Int Set all the preset data back to the factory defaults.
q To clear the PRESET data, press the
TRACK SEL. down.
“Initial OK?” flashes on the character display.
w Press the SEL. down. again and select “OK” to start clear the preset data.
“Preset Int” is displayed on the character display while data clearing.
e Once clearing is completed,
“Complete!”isdisplayed.
The “*” mark next to the data indicates the default value.
How to adjust the various Preset settings
1
Hold down •BACK –PRESET.
“PresetMode” is displayed.
2
Turn SEL. to select the setting item.
Press SEL. to enter the selected item.
3
Press •BACK –PRESET.
“Now Saving” is displayed.
Configuration is complete.