17
1. Initialization for the factory mode
Backup data initialization is carried out. See Initialization Items.
After initialization, move on to nomal mode.
CAUTION
Version information (such as rewriting failed log) Clear.
Clear the history of protection.
Operation
While holding down buttons "
SOURCE
" and "
CURSOR
d
" simultaneously, insert the AC plug into the wall outlet to turn
on the power.
d
Startup display
All lights display (2 seconds) - All off display (2 seconds)
Lighting of all LEDs on the unit (4 second)
"Factory Reset" displayed for 5 seconds.
Initialization Items (Default setting)
Setting
Source Internet Radio
DIMMER 100%
Sleep OFF
REPEAT/RANDOM OFF
Favorite list Clear all
iPod mode Remote Mode
Setup Menu/Network Set to Initial value, all
Protection history NO PROTECT
Version up information Clear all
2. Owner’s Manual described initialization mode (User Reset)
Backup data initialization is carried out. Refer to Initialization Items.
After initialization, move on to nomal mode.
CAUTION
The differences between this operation and restoring the factory default are as follows.
• Does not clear the version information such as rewriting failed log.
• Does not clear the history of protection.
• Network devices are started and initialized
d
Operation
In "STANDBY" status, press and hold the "
SOURCE
" and "
CURSOR
f
" buttons along with the power operation button to
turn on the power.
Startup display
"
Initialized
" displayed for 5 seconds.
Wait for more than 90 seconds after "
Initialized
" is displayed and then turn the power off.
d
(During this time, start and initialize the network devices.)
To Next Page
Loading...
