Denon DNP-730AE - Connecting the power cord

FIRMWARE UPDATE PROCEDURE
2. Updating by USB
The latest rmware can be downloaded to a USB memory for updates.
2.1. Connecting to the USB Memory
(1) Preparation
• USB format : Prepare a USB memory formatted in FAT16 or FAT32.
• USB ash drive (memory), use the USB2.0.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
2.2. Unzip Download File
Unzip the downloaded le on your computer.
DNP-XXXXXXX USB_DNP-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
USB memory supports only USB2.0.
You can nd "
rmwares
" folder after unzipped.
Copy that folder to USB ash drive.
You have to put "
rmwares
" folder on root directly on USB ash drive(memory).
copy to USB flash drive
25