Denon DRA-385RD - Printed Wiring Board Parts; Main Unit Components (Semiconductors, Resistors)

ENGLISH
SPECIFICATIONS
AMPLIFIER SECTION TUNER SECTION
Continuous Power Output 65 W + 65 W (4 ohms, 1 kHz) [FM] (note: pV at 75 ohms, 0 dBf = 1 x 10° W)
(DIN): Receiving Range: 87.5 ~ 108 MHz
Power Bandwidth (IHF): 40 Hz ~ 40 kHz (T.H.D. 0.15% both channels Usable Sensitivity: 0.9 pV (10.3 dBf)
driven into 8 chms) Signal to Noise Ratio
(IHF-A): MONO 82 dB
Total Harmonic Distortion: 0.03% (-3 dB at rated output, 8 ohms) STEREO 78 dB
Frequency Response: PHONO RIAA Standard Curve (Recording Out- Image Rejection: 65 dB
put) Selectivity (+ 300 kHz): 55 dB
MM) 20Hz ~ 20 kHz+0.5 cB
CD, VIDEO, 20 Hz ~ 50 KHz # 1.5 dB Frequency Response: 30 Hz ~ 15kHz *°2 ap
TAPE (at 1 W) as
Stereo Separation
Input Sensitivity and {at 1 kHz): 40 dB
Impedance: PHONO MM 2.5 mV 47 kohms [AM]
CD, VIDEO, 150mV = 25 kohms Receiving Range: 522 ~ 1611 kHz
TAPE
Maximum Input Level: Usable Sensitivity: 18 pV
(at 1 kHz) PHONO MM 120 mV Signal to Noise Ratio: 55 dB
Signal to Noise Ratio
(IHF-A): PHONO MM 78 dB (at 5.0 mV input)
CD, VIDEO, 98 dB General
TAPE Power Supply: AC 230 V 50 Hz
Tone Controls: BASS + 10 dB at 100 Hz Power Consumption: 125 W
TREBLE + 10 dB at 10 kHz
Power Outlet: SWITCHED 100 W
Loudness Control Effect: Variable Loudness at maximum position Dimensions: 434 mm (W) x 119 mm (H)
50 Hz/10 kHz, + 10 dB/+5 dB x 310 mm (D)
Weight: 5.9 kg
REMOTE CONTROL UNIT RC-174
Remote control system: Infrared pulse system
Power supply: 3V DC Two size “AA” (R6)
dry cell batteries
External dimensions: 60 mm (W) x 175 mm (H)
x 18 mm (D)
Weight: 120 g (includes batteries)
Design and specifications are subject to change without prior notice.
15