Denon DRA-F109 - Basic Operation

9
Basic operation
n Turning the power on (vpage9)
n Setting the current time (24-Hour display)
(vpage10)
n Selecting the input source (vpage11)
n Adjusting the master volume (vpage11)
n Adjusting the tone (vpage11)
n Turning off the sound temporarily (vpage11)
n Switching the brightness of the display
(vpage11)
n Listening to FM broadcasts (vpage12)
n Listening to DAB/DAB+ (for UK model only)
(vpage16)
n Advanced operation (vpage18)
n About system functions (vpage21)
Preparations
Turning the power on
Press POWER X.
•The power turns on. Press again to set the
power to standby.
•Power indicator
Normal standby .......................Off
Power on .................................Green
Alarm standby .........................Orange
•When the power is turned on, the function that was being used
when the power was last turned off is selected (vpage 20
“Last function memory”).
•The receiver switches to the low power consumption mode about
30 minutes after it is set to standby.
When the power is in the standby mode, pressing one of the following
buttons also turns this unit on.
•X or PRESET CALL on the main unit
•TUNER, ANALOG IN or DIGITAL IN on the remote control unit
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, unplug the power cord from the power outlet.
n Completely turning off the power
Unplug the power cord from the wall outlet.
•Note that the time setting is cleared when the power cord is
unplugged from the outlet.
•The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
Preparations
Operations
Informations
Operations
CD