Denon DRA-F109 - Presetting Fm Stations Manually

13
Listening to FM broadcasts
Presetting FM stations manually
Up to 40 stations can be preset.
1
Tune in the station you want to
preset.
2
Press ENTER.
The minimum number display “P– –” for
the unregistered preset flashes.
3
Use 0 – 9, +10 or CH –, CH + to
select the number to be preset,
then press ENTER.
The reception frequency and reception
mode are preset and the display
switches to the station name input
display.
4
Input the station name.
Names of up to 8 characters can be input.
•0 – 9, +10 button ............... Selects the character.
•u, i button..................... Selects the character.
•p button .......................... Moves the cursor to the right.
•CLEAR button ................... Deletes the currently selected
character.
•Characters that can be input.
A ~ Z, 0 ~ 9, ^ ’ ( ) * + , - . / = (space)
•If you do not want to input a station name, press ENTER without
inputting anything else.
•If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
5
Press ENTER.
The characters you have input are entered.
•To give names to other stations, repeat steps 1 to 4.
Listening to preset stations
Use 0 – 9, +10 or CH –, CH + to select
the preset number.
Operating using the PRESET CALL buttons
on the main unit
PRESET CALL on the main unit can be used for switching the preset
channel.
Preparations
Operations
Informations
Operations
CD