Denon DRA-F109 - Advanced Operation

18
Advanced operation
Setting the alarm
The everyday alarm, once alarm and sleep timer can be set.
Alarm order of priority
The order of priority when the times set for the different alarms
overlap is as follows:
1. Sleep timer
2. Once alarm
3. Everyday alarm
If the current time is not set, enter alarm setting mode to get time
setting mode.
Setting the alarm
•Everyday alarm (“EVERY DAY”)
Playback starts and stops (the power turns off) at the set times each
day.
•Once alarm (“ONCE”)
Playback starts and stops (the power turns off) once only at the set
times.
1
Press SYSTEM SETUP.
2
Use ui to select “ALARM
SETUP”, then press ENTER or p.
3
Use ui to select the alarm
mode, then press ENTER or p.
MODE SELECT
ONCE ALARM
ONCE
EVERYDAY
4
Use ui to select the source, then press ENTER or p.
SOURCE SELECT
CD
iPod/USB
(CD)
TUNER
INTERNET RADIOCD DIGITAL IN:OPTiPod/USB
(NET)
ANALOG IN:1 ANALOG IN:2
Only when the “TUNER” function is selected
5
Use ui to select the preset number, then press
ENTER or p.
•When no name has been registered for the selected preset
number, the program service or frequency appears after the preset
number is displayed.
6
Use ui to select “hours” for the alarm start time,
then press ENTER or p.
ON TIME
10:00> 00:00
7
Use ui to select “minutes” for the alarm start time,
then press ENTER or p.
ON TIME
10:30> 00:00
n Basic operation (vpage9)
n Setting the alarm (vpage18)
n Convenient functions (vpage20)
n About system functions (vpage21)
Preparations
Operations
Informations
Operations
v See overleaf
CD