15
Listening to FM broadcasts
TP (Traffic Program)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your
area before leaving home.
n TP search
Use this function to find RDS stations broadcasting traffic programs
(TP stations).
1
Press TUNER to select “FM”.
2
Press SEARCH.
3
Use ui to select “TP SEARCH”,
then press the ENTER or p.
4
Press o p.
Automatically begin the TP search
operation.
•“NO STATION” is displayed when there is
no traffic information broadcast station.
RT (Radio Text)
RT allows RDS stations to send text messages that appear on the
display.
•When the RT mode is turned on while an RDS radio station not
offering an RT service is tuned in, “NO TEXT” is displayed on the
display, then the mode automatically switches to the PS mode.
•In the same way, the mode automatically switches to the PS mode
when the RT service is finished. In this case, the mode automatically
switches from the PS mode back to the RT mode when an RT
broadcast is resumed.
•The RT mode cannot be set in the FM stations not offering RDS
broadcasts.
NOTE
The operations described below selecting “RDS Search” will not
function in areas in which there are no RDS broadcasts.
CT (Clock Time)
Use this to correct the time of the clock on the unit.
q During CT reception, press SYSTEM SETUP.
The “AUTO Adj mm:ss” is displayed.
w Press ENTER to set.
The “RDS mm:ss” is displayed.
•The time on the set’s internal clock is updated to the currently
displayed “CT” time.
Do not operate any buttons while the time is being updated. If buttons
are operated, CT reception is not possible and the time is not updated.
To Next Page
Loading...
