16. PLAY. Plays / Pauses the
track. Press and hold
SHIFT and then press this
button to "stutter-play" the
track from the last set Cue
Point.
17. CUE. When the Deck is
paused, you can set a
Cue Point by moving the
Platter to place the Audio
Pointer at the desired
location and then pressing
the Cue Button.
During playback, you can
press the Cue Button to
return the track to this
Cue Point. (If you did not
set a Cue Point, then it
will return to the beginning
of the track.).
If the Deck is paused, you can press and hold the Cue Button to play the track from
the Temporary Cue Point. Releasing the Cue Button will return the track to the
temporary Cue Point and pause it.
To continue playback without returning to the Temporary Cue Point, press and hold
the Cue Button, then press and hold the Play Button, and then release both buttons.
Press and hold SHIFT and then press this button to return to the beginning of the
track.
18. SYNC. Press this button to automatically match the corresponding Deck's tempo
and phase with the opposite Deck's (or the Master Deck’s if using a 4 decks Skin)
tempo and phase. Hold SHIFT down and then press this button to set this deck as
Master Deck (for 4 decks skins).
19. PITCH BEND. Press and hold these buttons down to temporary speed up/slow
down the song while pressed. When released, the track playback will return to the
speed designated by the Pitch Fader.
Hold SHIFT down and then use these buttons to move the track forward or
backwards by 8 beats (seek)
20. KEYLOCK. Press this button to "lock" the track's pitch to its original key. The track's
tempo will remain at the speed designated by the Pitch Fader. Hold SHIFT down and
then use this button to select the next available range of the Pitch Fader ( from ±6%,
±8%, ±10%, ±12%, ±20%, ±25%, ±33%, ±50% to ±100%).
21. PITCH. Adjust the track's playback speed (tempo).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
