Denon MC4000 User Manual

VirtualDJ 8 – Denon MC4000
13
Push the left encoder to trigger the selected Video Transition and the right
encoder to trigger the selected Master Video Effect.
Hold SHIFT down and then use the left encoder to adjust the 1
st
parameter of the
selected video Transition (if available) and the right encoder to adjust the 1
st
parameter of the selected Master Video Effect (if available)
Hold SHIFT down and then push the left encoder to open/close the FX GUI of the
selected Video Transition and the right one to open/close the FX GUI of the selected
Master Video Effect.
G. MICROPHONE
37. MIC1 LEVEL. Adjust the gain (input level), of MIC1
Microphone Input
38. MIC2 LEVEL. Adjust the gain (input level), of MIC2
Microphone Input
39. ECHO. Use this button to enable/disable the Echo Effect on
both Microphone Inputs. The amount of the applied Echo
Effect is controlled from the front panel of the unit.
40. TALK OVER. Use this button to enable/disable Talk Over (led will blink when
engaged). When enabled, the MC4000 detects the MIC inputs and attenuates the
audio signal level of the master output. When using the microphone, this function
prevents the microphone audio from being covered by the music, making speech
easier to hear
Hold SHIFT down and use this button to disable/enable MIC Inputs (Announcements)
to the Booth Output.
H. MASTER
25. MASTER VOLUME : Adjusts the Master Output Volume
(Hardware operation - movement not visible on the
VirtualDJ GUI)
26. BOOTH VOLUME. Adjusts the Booth Output Volume
(Hardware operation – movement not visible on the
VirtualDJ GUI)
27. AUX VOLUME. Adjust the gain (input level), of the Auxiliary
Input (Hardware Operation – not visible on the VirtualDJ
GUI)

Denon MC4000 Specifications

General

MIDI	24 bit
Sample rate	48 kHz
Mixer section	Yes
Product color	Black
Frequency range	20 - 20000 Hz
Output level (XLR)	4 dBV
Built-in optical drive	-
Signal-to-Noise Ratio (SNR)	88 dB
Number of dedicated effects controls	2
Maximum output level (master, balanced, XLR)	24
Total Harmonic Distortion plus Noise (THD+N)	0.01 %
USB version	2.0
USB connector type	USB Type-B
USB ports quantity	1
Current	3 A
Input voltage	5 V
Power supply type	AC

Weight and Dimensions

Depth	312 mm
Width	505 mm
Height	69 mm
Weight	4060 g
Package weight	6000 g