Denon RCD-M40

o
Making the DAB settings
1
Press DAB/RDS during DAB reception.
2
Use ui to select “item”, then press ENTER.
TUNING AID:
The reception intensity of the currently
tuned in frequency is displayed. Use this
if your preferred station cannot be
received.
A
Use the o and p buttons to select a
frequency to tune into. It takes around
4-5 seconds to correctly display the
reception intensity (→|) after selecting
a frequency.
B
If necessary, adjust the position of the
antenna so that the reception
intensity (→|) passes to the right of the
2 mark.
The station can now be received.
C
Press the ENTER button to select the
station and exit TUNING AID.
STATION ORDER:
The service list is created with the auto
scan function.
0
MULTIPLEX: In order of frequency
0
ALPHANUMERIC: In alphabetical
order
DRC (Dynamic Range
Control):
Off / 1/2 / 1
DAB VERSION: The DAB module’s version is displayed.
o
DAB initialize
When the “DAB Initialize” procedure is performed, all the preset
memory settings for the stations and DABs are reset.
1
Press SETUP during DAB reception.
2
Use ui to select “TUNER SETUP”, then press ENTER.
3
Use ui to select “DAB INITIALIZE”, then press ENTER.
4
Press ENTER.
0
Once initialization is completed, auto scanning is performed
automatically.
Contents Connections Playback Settings Tips Appendix
41
Front panel Display Rear panel Remote Index