D
STOP TIME
Use ui to select “hours” for the alarm stop time, then press ENTER.
Use ui to select “minutes” for the alarm stop time, then press ENTER.
E
ALARM ON/OFF
Use o p to select “ON” or “OFF” for the alarm, then press ENTER.
0
The s indicator lights and the alarm setting is entered.
0
The alarm settings are displayed for 3 seconds.
F
Press POWER X to set the power to standby.
Alarm standby mode is set, and the power indicator lights orange.
ALARM ON/OFF
1
Use ui to select “ONCE” or “EVERYDAY”.
2
Use o p to select “ON” or “OFF” for the alarm, then
press ENTER. The alarm settings are displayed after
this.
0
When set to “OFF”, time operation is disabled, but the alarm
settings remain unchanged.
Contents Connections Playback Settings Tips Appendix
56
Front panel Display Rear panel
Remote
Index
To Next Page
Loading...
