2. User Initialization Mode
Various settings are initialized. See "Initialization Items (Default setting)" for information on the settings that are initial-
ized.
After initialization, move on to normal mode.
There are two differences between this operation and factory initialization
•Version information (such as rewriting failed log) not cleared.
•History of protection not cleared.
2.1.Operation
2. Hold down buttons "
CURSOR
d
" and "
CURSOR
f
" at the same time and press the power button to turn on the
power.
Flashing of the standby indicator LED(White).
↓
"
Initialized
" displayed for 5 seconds
3. Version Display Mode
Menu items appear in the Add Version. Otherwise, normal operation.
3.1. Starting up
In "
STANDBY
" status, press and hold the "
CURSOR
u
" button along with the power operation button to turn on the
power.
"Version" displayed for 5 seconds.
3.2. Display Order
Error information →
q
System u-com Version →
w
System u-com(boot loader) Version
→
e
Network u-com(boot loader) Version →
r
Network u-com(IMG) Version
→
t
Bluetooth Mac Address
24
To Next Page
Loading...
