Denon RCD-N9

Special Mode Conguration Buttons
b
No. 1 ： In "
STANDBY
" status, press and hold the "
A
" and "
B
" buttons along with the power operation button for at least three
seconds.
b
No. 2 - 6 ： In "
STANDBY
" status, press and hold the "
A
" and "
B
" buttons along with the power operation button to turn on the
power.
b
No. 7 ： While holding down the "
A
" and "
B
" buttons, insert the AC plug, turn on the power and wait at least three seconds.
If the "
ON/STANDBY
" button is lit, the unit enters this mode.
    
1 Version Display Mode CURSOR
u
-
The rmware version is indicated in the display.
(See 24 page)
2 Factory Initialization Mode CURSOR
u
INPUT
SOURCE
Restores settings to the default settings.
b
Can erase the Recently Played list.
(See 23 page)
3 User Initialization Mode VOLUME
d
VOLUME
f
This is similar to factory initialization, except that the version
upgrade information and protection history are not cleared.
(See 24 page)
4 CD Test mode CURSOR
o
VOLUME
d
Servo adjustment, Leaser current, ON time
(See 26 page)
5 Protection History Display Mode CURSOR
o
INPUT
SOURCE
Displays the protection occurrence history.
(See 29 page)
6 USB UPDATE CURSOR
p
INPUT
SOURCE
Switches this unit to USB Update mode.
(See 31 page)
7 Forced USB All Device Write Mode CURSOR
u 1
/
3
/ENTER
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode. (See 33 page)
ENTER
VOLUME
X
open/close
CURSOR
uiop
VOLUME
df
INPUT SOURCE
1
/
3
/ENTER
GTop panelH
GFront panelH
SPECIAL MODE
22