Denso BHT-904B - Page 88

74
BHT-904B/BHT-914B
“2 tting of the interleaved 2of5 (ITF) reading
1. S the SET BARCODE menu and then press the ENT key.
ears.
“1
“2
mum number of the ITF digits.

: ITF”: Detail se
elect “2: ITF” at
The SET ITF screen app
: MIN”:
Sets the minimum number of the ITF digits.
Setting range: 2 to 99
: MAX”:
Sets the maxi
Setting range: 2 to 99
Point  Always set the minimum number of digits to a number less than the maximum number o
f
digits. If the minimum number exceeds the maximum number, a read error occurs.
“3: C K
igit is correct. Reading is not carried out if either
xit.
“OFF”: Reading is carried out regardless of the presence of the check digit.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to select the desired item.
Press the cursor keys ([◄] [►]) to select the desired setting.
e ENT or Backspace/clear key to update the setting and return to the SET BAR
CODE
menu.
D CHEC
”:
“ON”: Reading is carried out only if the check d
the check digit is incorrect or does not e
2.
3.
4.
Press th