76
BHT-904B/BHT-914B
“4: CODE39”: Detail setting of the Code 39 reading
1. Select “4: CODE39” at the SET BARCODE menu and then press the ENT key.
The SET CODE39 screen appears.
“1: MIN”:
Sets the minimum number of the Code 39 digits.
Setting range: 1 to 99
“2: MAX”:
Sets the maximum number of the Code 39 digits.
Setting range: 1 to 99
Point Always set the minimum number of digits to a number less than the maximum number o
digits. If the minimum number exceeds the maximum number, a read error occurs.
“3: CD CHECK”:
“ON”: Reading is carried out only if the check digit is correct. Reading is not carried out if either
ot exit.
2. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to select the desired item.
3. Press
4. Press T SET BARCODE
menu.
The SET CODE93 screen appears.
“1: MIN”:
Sets the minimum number of the Code 93 digits.
Setting range: 1 to 99
“2: MAX”:
Sets the maximum number of the Code 93 digits.
Setting range: 1 to 99
Point Always set the minimum number of digits to a number less than the maximum number o
the check digit is incorrect or does n
“OFF”:
Reading is carried out regardless of the presence of the check digit.
the cursor keys ([◄] [►]) to select the desired setting.
the EN or Backspace/clear key to update the setting and return to the
“5: CODE93”: Detail setting of the Code 93 reading
1. Select “5: CODE93” at the SET BARCODE menu and then press the ENT key.
To Next Page
Loading...
