78
BHT-904B/BHT-914B
(RSS-Limited setting)
Enables or disables reading of the RSS-Limited (GS1 Databar Limited). (RSS-Expanded setting)
Enables or disables reading of the RSS-Expanded (GS1 Databar Expanded).
Stacked (GS1 Databar Expanded Stacked) digits.
Setting range: 1 to 99
Sets the maximum number of the RSS-Expanded (GS1 Databar Expanded) or RSS-Expanded
Point Always set the minimum number of digits to a number
“3: READING”:
“4
: READING”:
“5: MIN”:
Sets the minimum number of the RSS-Expanded (GS1 Databar Expanded) or RSS-Expanded
“6: MAX”:
Stacked (GS1 Databar Expanded Stacked) digits.
Setting range: 1 to 99
less than the maximum number o
mber, a read error occurs. digits. If the minimum number exceeds the maximum nu
“7
or disables reading of the RSS-Expanded Stacked (GS1 Databar Expanded Stacked).
ble of the Stacked type barcode, it is necessary to set both “4: READING”
and “7: Stacked” to ON.
: Stacked”:
Enables
Point To ena reading
2. Use the cursor keys ([
and return to the SET BARCOD
E
menu.
▲] [▼]) or numeric keys
([1] [2] [3] [4] [5] [6] [7]) to select the desired item.
3. Press the cursor keys ([◄] [►]) to select the desired setting.
4. Press the ENT or Backspace/clear key to update the setting
To Next Page
Loading...
