Denso BHT-904B - Page 94

80
BHT-904B/BHT-914B
[5] Setting the communication environment
The communication environment settings following system initialization are follows.
Do not change these settings unless necessary.
Item Default
Interface port Optical (infrared interface port)
Co Ymodem protocol mmunication protocol
Infrared interface port
TRANSMIT SPEED 115200 bps
PROTOCOL Protocol options SERIAL No.: ON (Adds serial numbers to data
blocks.)
FIELD SPACE: Ignore (Trim)
H. PARITY: ON (Adds horizontal parity.)
LINKUP TIME: 30 seconds
U SB interface port
PR OL
blocks.)
tal parity.)
LINKUP TIME: 30 seconds
ore (Trim)
OTOC Protocol options SERIAL No.: ON (Adds serial numbers to data
H. PARITY: ON (Adds horizon
FIELD SPACE: Ign