E8
MENU SETTINGS
Note: Press MENU repeatedly to exit the settings or leave it for few seconds and it will automatically
return to normal mode.
AUDIO SETTINGS
1. Press MENU. Select AUDIO and press VOL knob.
2. Rotate VOL knob and select the desired mode listed below:
BASS : -10 - +10
TREBLE : -10 - +10
BALANCE : L - R
FADER : F - R
EQ : OFF, FLAT, CLASSICS, POP, ROCK
3 Rotate the VOL knob until the desired sound is obtained.
Note: Press SEL on the remote control to setup Audio Settings.
PICTURE SETTINGS
1. Press MENU. Select PICTURE and press VOL knob.
2. Rotate VOL knob and select the desired mode listed below:
RED : 0 - 50
GREEN : 0 - 5050
BLUE : 0 - 5050
BRIGHTNESS : 0 - 5050
CONTRAST : 0 - 5050
SHARPNESS : 0 - 77
SCREEN : 16:9 / 4:3 / FULL
COLOR RESET : YES/NO
3. Rotate the VOL knob until the desired sound/feature is obtained.
DUAL SETTINGS
DUAL is a feature that lets user control the external AV device and the head unit. For example, driver
can listen to radio while the passenger at the back can watch DVD. This unit supports connection
of external AV device such as portable TV through the AUDIO OUT and VIDEO OUT port.
1. Connect the AUDIO OUT and VIDEO OUT port at the back of head unit to the LINE IN of external
AV device.
2. Press MENU. Select DUAL and press VOL knob. (Press DUAL key on remote)
3. Press VOL knob to turn ON DUAL feature.
4. Rotate the VOL knob to KEY. Press VOL knob to choose between:
CURRENT – controls the volume of the main head unit.
DVD –control the volume of the connected external device.
5. To set the volume, rotate volume knob to VOL and press Enter. Rotate volume knob to desired
hearing level.
RDS SETUP
1. Press MENU. Select RDS SETUP and press VOL knob.
2. Rotate VOL knob to the desired item listed below
TA (Alarm, Seek) ---- PI (Sound, Mute) ---- RETUNE(Short, Long) ---- MASK (All, DPI) ----
EON TA(Local, DX) ---- REG (ON, OFF) ---- TA VOL (0 - 50)
3. Rotate VOL knob until desired sound/feature is obtained.
EXPERT SETTINGS
1. Press MENU. Select EXPERT and press VOL knob.
2. Rotate VOL knob and select the desired mode listed below
STEREO/MONO
: switch between stereo or mono sound.
BEEP : ALL – beep sound can be heard while pressing any keys. ALL – beep sound can be heard while pressing any keys.– beep sound can be heard while pressing any keys. beep sound can be heard while pressing any keys.
2nd – beep sound can be heard only when turning unit off.
OFF – no beep sound.
LOUD : Turn on/off LOUD feature (ON/OFF)
OSD COLOR :
Tuner mode screen background color. (Light blue -Dark Blue – Yellow Ocher)
3. Rotate the VOL knob until the desired feature is obtained.
To Next Page
Loading...
