(2) Replacement of engine oil filter element
Replace the engine oil filter at 50 hours only first time and every 500 hours after second
time.
In the case of 45USI-USI2, cartridge is attached upward,
Remove the drain plug and discharge oil completely
in advance.
Ф Remove the cartridge type element (cartridge)
using filter wrench.
Ф Clean the filter base. Coat the packing of new
cartridge with engine oil thin. Then, mount the
cartridge.
* When mounting, tighten the cartridge from
3/4 to 1 turn by using filter wrench after the
packing is fitted to the seal of the filter base.
(3) After the element is replaced, run the engine
for a while. Then, check to see that oil is
supplied to the level between H and L DCA-25US1 *USI2
DCA-60USH
Parts number of oil filter cartridge :
Model name
Parts number
manufacture Parts number of manufacture
DCA-25USI-USI2 06020 41210 ISUZU
894456-7411
DCA-45USTUSI2 06020 41214 ISUZU 897049-7081
DCA-60USH
06020 4)196
HINO 15607-1480
DCA-45US1*US12
cartridge
□
- put fiie filter w rench
- 56 -
To Next Page
Loading...
