- 47 -
E
(4) Replacement of PCV filter element (only 180ESEI)
① Wipe clean around the PCV filter cap taking care so that
no foreign particles entry. Remove the PCV filter cap.
② Remove the PCV filter element.
③ Install the new PCV filter element.
④ Install the PCV filter cap.
Parts number of PCV filter element :
Model name Parts number Manufacture Parts number of manufacture
DCA-180ESEI Y06020 44210 ISUZU 898030-5320
(5) Replacement of fuel filter cartridge (pre filter and main filter)
① Remove the cartridge type element (cartridge) using filter wrench.
② Clean the filter base. Coat the packing of new cartridge with engine
oil thin. Then, mount the cartridge.
• When mounting, tighten the cartridge about from 1/2 to 3/4 turn by
hand after the packing is fitted to the seal of the filter base.
③
After the cartridge is replaced, discharge air in the fuel piping.
• For details, refer to the instruction manual for the engine. A nameplate
showing the method of discharging air is also attached to the machine.
Parts number of fuel pre filter cartridge:
Model name Parts number Manufacture Parts number of manufacture
DCA-70,125,180ESEI Y06020 42516 ISUZU 898074-2880 (898075-8540)
Parts number of fuel main filter cartridge :
Model name Parts number Manufacture Parts number of manufacture
DCA-70,125,180ESEI Y06020 42518 ISUZU 898143-0410
(6) Cleaning of radiator and intercooler
When the fin or tube is blinded, it should be cleaned
with steam or high pressure water.
[ NOTE ]: When a high pressure washer is used, spray water from
a place about 1.5m away to prevent damage to the fin or
tube.
To Next Page
Loading...
