EN-16 Original User Guide | Pedelec Impulse Evo Version 1
PLEASE NOTE
Do not tug at the display cables or display-cable plugs. If you do
so, you may break the plug-retaining lugs. If you want to detach
the display – e.g. because it is no longer functioning – contact your
dealer.
3. Drive unit, display and easy-reach control
3.1 Safety information
WARNING
Do not open the drive unit. This presents a risk of electric shock. The
warranty also becomes null and void. Only have repairs to the drive
unit carried out by trained cycle dealers.
Always remove the battery before working on the Pedelec. The cycle
could switch on without warning, seriously injuring you.
Do not allow yourself to be distracted by the display. Only congure
menu settings when the Pedelec is stationary. If you do not fully con-
centrate on trac, you risk being involved in an accident or falling o.
PLEASE NOTE
All components mounted on the drive unit, and all other drive
components, may only be replaced with identical components or those
approved specially for your Pedelec by the manufacturer. Overloading
and damage may result otherwise.
Do not open the display. It can be damaged beyond repair.
To Next Page
Loading...
