Derby cycle Pedelec Impulse Evo - Show Ride Data; Deleting Trip Data

EN-26 Original User Guide | Pedelec Impulse Evo Version 1
3.4.2.2 Deleting trip data
In main menu option "Delete trip data", you can reset to 0 options Trip
(in km), Trip time (in 00:00:00), Trip max (in km/h) and Trip Ø (in km/h).
Proceed as follows for this:
1. Navigate to "Delete trip data" as described in  3.4.1 Configuring
settings in the menu Page EN-22.
2. Prompt "Conrm delete?" is shown on the display, with "Yes" and "No"
underneath
3. Select the required option using the
/ buttons. The selection has a
black background.
4. Conrm your selection by briey pressing the
button.
You return to the menu sub-items.
3.4.2.1 Show ride data
You can display the following menu options in the "Show ride data" main
menu option:
Menu sub-items Meaning
Trip (in km) Trip (e.g. day trip, short trip) in kilometres.
Trip time (in 00:00:00
format)
Duration of trip (e.g. day trip, short trip) in hours, minutes and
seconds.
Trip max (in km/h) Maximum speed (in kilometres per hour) achieved on the trip
(e.g. day trip, short trip).
Trip Ø (in km/h) Average speed (in kilometres per hour) achieved on the trip
(e.g. day trip, short trip).
Tour (in km) Tour (e.g. cycle tour over several days) in kilometres.
Tour Ø (in km/h) Average speed (in kilometres per hour) achieved on the tour
(e.g. cycle tour over several days).
Total (in km) Total number of kilometres ridden.
1. Select the required option using the
/
buttons. A box on the right
shows how far you can scroll up and down. The option selected is
shown with a black background.
2. Conrm your selection by briey pressing the
button.
You return to the menu sub-items.