EasyManua.ls Logo

Deta eVolo EVC7005 - Product Specification

Deta eVolo EVC7005
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
9. Product Specification
Specification
AC Charging Output
Maximum 7.4kW/22kW
Input Supply
230V/410V AC 50 Hz 32Amax. single or three phase
Input
1.5m flexible combined 3-phase 6mm
2
power & RS485 data
cable
Earthing Systems
TNC-S or TT
Connector Type
Untethered Type 2 Socket
Indications
4 LEDs multicolored
Touch Screen LCD Display
5” Touch LCD screen
Metering
Built in meter IC, ± 1 % (accuracy)
Integrated RCD
AC 30mA + DC 6mA
Protection
• Overcurrent
• PEN fault detection and isolation
• Integrated surge protection
Connectivity
• Ethernet (RJ45)
• Bluetooth
• Wi-Fi (2.4GHz)
• RS485
• 4G
Communication Protocols
OCPP 1.6J
Mounting
Wall-mounted or floor using an optional pedestal
Enclosure Ratings
IP54, IK08, indoor or outdoor installation
Operating Temperature
-30 to +50°C
Storage Temperature
-40 to +70°C
Safety and Compliance
• BS IEC/EN 61851-1
• BS EN 61851-22
• BS EN 62196-1
• BS EN 61008-1
• BS EN 60947-2
• BS IEC 62955
• The Electric Vehicles (Smart Charge Points) Regs.2021
Codes and Standards
UKCA, CE (TUV)
Load management
• The maximum charging current can be set within the
commissioning APP
• Additional hardware, e.g. MID energy meter, can be used
to manage the current to the EV depending the available
supply at a point in time