The eVolo AC charge point is designed to charge electric vehicles (hereinafter referred to as
EVs).
This product can be controlled via an APP and requires an internet connection for general
use, software updates etc. This internet connection can be hardwired or via Wi-Fi. The
eVoomXT also has 4G capability by adding a 4G data SIM card. For the purposes of
commissioning, a mobile device which is Bluetooth enabled and has a mobile data
connection, e.g. 4G, can be paired to the eVoomXT.
Users with a mobile device with Bluetooth can control the eVoomXT, once paired, should
the internet connection have failed.
Intended Use
The eVolo AC charge point is intended for charging of EVs only. It is suitable for both indoor
and outdoor use.
This product must be commissioned by an approved eVolo installer.
The end user should register on the eVolo website by scanning the web QR code on the side
of the charge point before being prompted to download the user APP.
• Touch screen display displaying energy usage
• Individual users can be billed for the electricity used
• Single or three phase installations
• Load balancing options available
• APP control or via the RFID card
• LED indications
• Energy usage can be viewed within the APP
• Scheduled charging can be set within the APP
• Ethernet or Wi-Fi connection
• 4G capability (SIM card not included)
• Bluetooth connection for commissioning
• Built in approved MID energy meter
To Next Page
Loading...