Need help?Do you have a question about the DEVA DB910 and is the answer not in the manual?
Details the indicators and connectors on the front panel of the DB910 unit.
Provides pinout diagrams and descriptions for the DB15 connector.
Lists essential safety precautions for operating the electronic equipment.
Provides guidelines for optimal performance and environmental conditions.
Discusses heat generation and ventilation requirements for the unit.
Advises on careful placement to avoid interference from RF fields.
Details how to connect analog and digital audio inputs and outputs to the device.
Specifies the requirement for connecting the device to a network via an RJ-45 cable.
Guides on enabling network discovery for easier device detection.
Explains how to log in to the web interface using default credentials.
Describes the main status window showing audio levels and device information.
Explains how to configure Server/Client mode, port, and URL for full-duplex operation.
Details settings for the transmission input, encoder, and quality.
Details settings for the reception decoder and pre-buffer.
Details settings for the first IP Audio Client, including decoder, gain, and pre-buffer.
Details settings for the second IP Audio Client, including decoder, gain, and pre-buffer.
Allows user to define the priority for main and backup audio sources.
Configures thresholds and timeouts for audio loss and recovery detection.
Settings for playback order, file management, and jingle player.
Explains how to divide the day into parts for different audio source usage.
Adjusts the output level for analog audio.
Controls the enabling or disabling of the digital audio output.
Adjusts the output level for the headphones.
Enables or disables IP voice announcements, like IP address readouts.
Manages user login, username, and password for device access.
Allows manual setting or synchronization of the device's date and time.
Enables automatic clock synchronization with an internet time server.
Manages automatic IP address assignment for the device.
Configures HTTP and FTP server parameters like ports and timeouts.
Sets up email recipients and server details for alarm alerts.
Configures the SNMP agent for network monitoring and notifications.
Configures the function and baud rate for the RS-232 port.
Selects functions for General Purpose Inputs (GPI) like source switching.
Selects functions for General Purpose Outputs (GPO) like audio loss indication.
Instructions for updating the device firmware via a file upload.
Displays information about used and free storage space.
Explains how to restore factory default settings, excluding network.
Instructions for rebooting the DB910 unit.
States that DHCP is enabled after a hardware reset.
Lists the default port, username, and password for the web server.
Guides on setting up two DB910 units to operate in full-duplex mode.
Illustrates the network topology for full-duplex audio transmission.
Lists requirements for setting up a pair of DB910 units for full-duplex.
Provides instructions on configuring an FTP client to connect to the device.
Details the four key parameters for the built-in FTP server.
Explains port forwarding requirements for NAT routers and firewalls.
Outlines the terms for returning products for a full refund within 30 days.
Lists conditions for warranty validity, including registration and product care.
Specifies the two-year warranty period for defects in materials and workmanship.
Details the process for returning equipment for warranty or other repairs.
General| Frequency Response | 50 Hz - 16 kHz |
|---|---|
| Power Supply | DC 12V |
| Remote Control | Yes |
| Directivity | Cardioid |
| Operating Voltage | DC 12V |
| Connector | XLR |
| Audio Output | XLR |
| Cable Length | 2m |
| Microphone Type | Condenser |
To Next Page