DEVA DB910 - E-Mail; HTTP Server; FTP Server; SNMP Agent

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: o󰀩ce@devabroadcast.com ,Web: www.devabroadcast.com
- 32 -
E-mail
Enter the desired alarm recipients in E-mail 1 and/or E-mail 2 elds. Fill in your e-mail account
settings: Sender, Username and Password, Server, SNMP port and Connection Type.
If you experience diculties in the set-up, or would like to use DEVA account for sending
of alarm email notications, press the [DEVA] button option, and complete the recipient emails
(E-mail 1 and E-mail 2) only. The other elds must be left blank, otherwise the email notication
option will not be working. Event though using the DEVA account eases the set-up process, we
recommend user account to be used for sending of email notications, and the DEVA account for
test purposes. When using DEVA account, please note that the stable 24/7 connection depends on
the mail service provider and cannot be guaranteed.
We recommend you to use the [Test] button and generate a test e-mail, which upon success will
be delivered to the specied E-mail 1 and/or E-mail 2.
Example of Test E-mail Message:
DB910 Test Message.
Please do not reply to this e-mail.
HTTP Server
Enable/Disable the HTTP Server. Specify the Server Port and Session Timeout.
FTP Server
Enable/Disable the FTP Server. Specify the Command and Data Ports to be used.
For information on how the connection between the DB910 and an FTP Client should be
congured, please refer to “Download les via FTP” on page 40.
SNMP Agent
Specify Agent ID, Agent Port, Read/Write Communities, Manager IP, Manager Port and Agent
Session Time.
Agent – enables/disables SNMP Agent.
Agent ID – is used for identication of the device among others, when an SNMP notication
is being sent.
Once all needed settings are applied, use the Test button to generate a test notication, which
upon success will be received by the SNMP Manager.
Press the [Download] button to download the latest available DB910 SNMP MIB le.
NOTE: The MIB le may vary from one rmware revision to another. Downloading this le
from the device, guarantees that you have the proper MIB le.