ineo+ 220/280/360 (Version 3) 1-53
1.16 Replacing consumables
1
When it is time to replace a drum unit, the following message appears (If it is replaceable by the user).
d Reference
For details on the replacement procedure, refer to page 1-57 of this manual.
When the waste toner box is full, the following message appears (If it is replaceable by the user).
d Reference
For details on the replacement procedure, refer to page 1-56 of this manual.
When there are no more staples in the finisher, the following message appears.
d Reference
For details on the replacement procedure for finisher FS-527, refer to page 1-58 of this manual.
For details on the replacement procedure for saddle stitcher SD-509, refer to page 1-59 of this manual.
For details on the replacement procedure for finisher FS-529, refer to page 1-60 of this manual.
To Next Page
Loading...
