Develop ineo+360 - Machine Options

Options
1
1-62 ineo+ 220/280/360 (Version 3)
1.17
1.17 Options
This section describes the configuration of the options installed on this machine.
By adding options, various office needs can be satisfied.
No. Name Description
1 Main unit The original is scanned by the scanner section, and the
scanned image is printed by the printer section.
2 Reverse automatic document feeder
DF-617
Automatically feeds and scans an original page by
page.
This unit automatically reverses and scans a 2-sided
original.
3 Original cover OC-509 Fixes the loaded original.
4 Authentication unit (biometric type)
AU-101
Performs user authentication by scanning vein pat-
terns in the finger.
Working table is required to install the authentication
unit.
5 Authentication unit (biometric type)
AU-102
6 Authentication unit (IC card type)
AU-201
Performs user authentication by scanning information
recorded on the IC card.
Working table is required to install the authentication
unit.
7 Working table WT-507 Allows you to move the control panel to a different lo-
cation. This is also used when the authentication unit
is installed.
• This option may not be available depending on the
sales area.
8 Working table WT-506 Provides an area to temporarily place an original or
other materials. This is also used when the authentica-
tion unit is installed.
1
2 3
17
16
21
20
18 19
12131415
4
8 7
9
5 6
11
10