Basic fax operation
2
2-12 ineo+ 220/280/360 (Version 3)
2.3
% Insert the original in the ADF with the side to be sent facing up.
% To check the destinations and the settings specified for the functions, press [Check Job Settings].
For details, refer to chapter 3 of the [User’s Guide Network Scan/Fax/Network Fax Operations].
% Press the [Proof Copy] key before pressing the [Start] key to display the preview image of the
currently specified settings on the touch panel.
4 Press the [Start] key.
% To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page
of the original, load the 2nd page and press [Start] again. Repeat this process until all the pages
have been scanned.
After the last page has been scanned, press [Finish], and then press the [Start] key.
d Reference
To stop the transmission after the [Start] key was pressed, press [Job List], then [Job Details], and then delete
the job to be stopped. For details, refer to chapter 3 of the [User’s Guide Network Scan/Fax/Network Fax
Operations].
To Next Page
Loading...
