DeVilbiss Carlisle DV1 - Start-Up Sequence

EN
1.
2.
3.
4.
5.
However, please consult the manufacturer of the gun wash machine to determine suitability
with this product.
Turn spreader valve (10) counter-clockwise until fully open.
Open the air flow valve (12) by turning counter-clockwise and trigger the spray gun (air only).
With the hose connected, turn on the air supply.
The gauge will show a reading in 1.0 psi [0.07 bar] increments.
The gauge will start reading at 4 psi [0.28 bar]
Adjust the flow valve until the required pressure value is displayed.
The gauge can be cleaned in a gun wash machine while attached to the spray gun.
Turn the air flow valve (12) at the bottom of the gun handle clockwise until fully closed.
START-UP SEQUENCE
SB-E-9-224 R1.0
7/8
www.carlisleft.com