EasyManua.ls Logo

Devolo Magic 1 LAN 1-1 User Manual

Devolo Magic 1 LAN 1-1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Manual
devolo Magic 1 LAN
1-1
Question and Answer IconNeed help?

Do you have a question about the Devolo Magic 1 LAN 1-1 and is the answer not in the manual?

Devolo Magic 1 LAN 1-1 Specifications

General IconGeneral
Product TypePowerline adapter
Data Transfer Rate1200 Mbps
Connectivity TechnologyWired
InterfaceEthernet
Ethernet Ports1
Maximum Data Rate1200 Mbps
Frequency Range2-68 MHz
Encryption128-bit AES
Data Link ProtocolEthernet, Fast Ethernet
Plug TypeEU
Operating Temperature0 °C to 40 °C

Summary

Preface

About this manual

Carefully read all instructions before setting up the device and store the manual and/or installation guide for later reference.

Description of the icons

This section contains a brief description of the icons used in this manual and/or on the rating plate, the device connector, as well as the icons used on the package.

Intended use

Use devolo products, devolo software and the provided accessories as described to prevent damage and injury.

CE Conformity

This product complies with the technical requirements of the directives 2014/35/EU, 2014/30/EU, 2011/65/EU und 2009/125/EC.

Safety notes

It is essential to have read and understood all safety and operating instructions before the devolo device is used for the first time.

devolo on the Internet

For detailed information on our products and devolo Magic, visit www.devolo.com.

Introduction

devolo Magic

Home is where devolo Magic is – in no time at all, devolo Magic transforms your house or flat into a multimedia home of the future.

Introduction to the devolo Magic adapter

Be ready for the technology of the future today devolo Magic embodies the new generation of the tried-and-tested Powerline technology (PLC).

Pairing

devolo Magic adapters that are in factory default condition, i.e. have been purchased or successfully reset, automatically start to attempt to pair with another devolo Magic adapter.

Reading the indicator light

The integrated indicator light (LED) shows the status for the devolo Magic 1 LAN 1-1 by illuminating and/or flashing.

Network connection

You can use the network connection on the devolo Magic adapter to connect it to a PC or television using a standard network cable.

Integrated electrical socket

Always use the integrated electrical socket on the devolo Magic adapter when connecting other consumers to the mains supply.

Initial use

Package contents

Please ensure that the delivery is complete before beginning with the installation of your devolo Magic 1 LAN 1-1:

System requirements

Operating systems supported by devolo Cockpit and Network connection requirements.

Connecting the devolo Magic 1 LAN 1-1

In the following sections we describe how to connect the devolo Magic 1 LAN 1-1 and integrate it into a network.

Starter Kit – Automatic set-up for a new devolo Magic network

Connect one devolo Magic 1 LAN 1-1 to your Internet access device's network connection (e.g. your Internet router).

Addition – Expanding an existing network by adding another devolo Magic adapter

Before you can use the devolo Magic 1 LAN 1-1 in your devolo Magic network, first you have to connect it to your existing devolo Magic adapters as a network.

Changing the network password

A network password can also be changed in the following ways: Using the web interface or using devolo Cockpit.

Installation of devolo software

devolo Cockpit finds all accessible devolo Magic adapters in your devolo Magic network, displays information about these devices and encrypts your devolo Magic network individually.

Removing the devolo Magic adapter from a network

To remove a devolo Magic adapter from your network and successfully restore its entire configuration to the factory default settings, press the PLC/reset button longer than 10 seconds.

Configuration

Calling up the built-in web interface

You can access the built-in web interface for the devolo Magic 1 LAN 1-1 in different ways: Using the devolo Home Network App or using the devolo Cockpit software.

Menu description

All menu functions are described in the corresponding interface as well as in the associated chapter in the manual.

Overview

In the Overview area, you will find information on hardware and software for the devolo Magic adapter and network details.

PLC

In the PLC area, you will find functions and information on the topic of Powerline and adapter pairing.

LAN

You make changes to the network settings in the LAN area.

System

In the System area, you can configure the settings for security and other devolo Magic adapter device functions.

Reset

Here, restart the devolo Magic adapter and/or restore it to the factory default settings.

Appendix

Technical specifications

Lists security, device port, power consumption, power supply, temperature, dimensions, ambient conditions, and certifications.

Bandwidth optimization

To significantly improve the transmission capacity of the network, we recommend that you comply with the following "connection rules".

Disposal of old devices

This product is an electrical or electronic device that falls within the scope of application of the European Community WEEE Directive.

Warranty conditions

If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product.

Related product manuals