Devolo Magic 1 LAN 1-1 - System

Configuration 30
devolo Magic 1 LAN
1-1
IPv6 configuration
If you want automatic IP address assignment and
there is already a DHCP server present on the net-
work for giving out IP addresses (e.g. your Internet
router), enable the DHCPv6 enabled option to en-
sure that the devolo Magic 1 LAN
1-1
automatically
receives an address from this device.
If you want to assign a static IP address, make
entries accordingly for the IPv6 address, IPv6 pre-
fix, Default gateway and DNS fields.
IPv6 link-local address: In the case of IPv6, the
devolo Magic adapter always has a fixed address
which can be used to access it within the
connected Ethernet or PLC network segment. This
link-local address is derived from the Ethernet MAC
address.
IPv6 link-local prefix: Corresponding format pre-
fix for link-local addresses
IPv6 SLAAC address: Using the SLAAC method
(Stateless Address Autoconfiguration), the
devolo Magic 1 LAN
1-1
automatically generates
an IP address by itself.
IPv6 SLAAC prefix: Corresponding format prefix
for SLAAC addresses
Confirm your settings with OK.
Then, restart the devolo Magic adapter (see Chap-
ter 4.2.5 Reset) to ensure that your changes take
effect.
4.2.4System
In the System area, you can configure the settings
for security and other devolo Magic adapter device
functions.