Name: Devolo Magic 1 LAN 1-1
Brand: Devolo
Rating: 4 (1 reviews)

To Next Page

To Previous Page

31 Configuration

devolo Magic 1 LAN

1-1

Identify device

The devolo Magic adapter can be located using the

Identify device function. Click Identify to make

the white LED for the corresponding adapter flash

for 2 minutes to make it easier to identify by sight.

LEDs

Enable the LEDs reduced option if the LEDs on the

devolo Magic adapter are intended to be switched

off for normal operation. An error status is indica-

ted by corresponding flashing behaviour regard-

less of this setting (see Chapter 2.3.1 Reading the

indicator light).

In System, you can enable Powersaving mode and

Standby mode on the devolo Magic 1 LAN

1-1

If Powersaving mode has been enabled, the

devolo Magic 1 LAN

1-1

switches to Powersave

mode automatically whenever reduced data trans-

mission over ethernet is detected.

The latency (time for transmitting a data

packet) may be negatively affected if very slow

data transmission is detected.

If Standby mode is enabled, the

devolo Magic 1 LAN

1-1

automatically switches to

Standby mode if no ethernet connection has been

Fig. 7: System

Questions and Answers:

Need help?

Do you have a question about the Devolo Magic 1 LAN 1-1 and is the answer not in the manual?

Devolo Magic 1 LAN 1-1 Specifications

General