DeWalt DW703 - Page 15

11
English
V1
V2
CENTER MARK ON VERNIER SCALE ALIGNS WITH
DESIRED WHOLE ANGLE ON MITER SCALE
(24° RIGHT MITER)
1/4° VERNIER MARK ALIGNS WITH CLOSEST WHOLE
DEGREE MARK ON MITER SCALE. (24 1/4° RIGHT MITER)
FIG. 21
FIG. 22
FIG. 23
FIG. 24
FIG. 26
BLADE
FENCE
RIGHT
FIG. 25
FENCE
TABLE
CROWN MOLDING FLAT ON TABLE AND AGAINST FENCE
CROWN MOLDING BETWEEN FENCE AND TABLE
TABLE
FENCE
BOTTOM SIDE
OF MOLDING
TOP SIDE OF
MOLDING
FIG. 25A
DW 7084 CROWN
MOLDING FENCE