To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DWFP55120 and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | DWFP55120 |
| Category | Air Compressor |
| Language | English |
Explains explosion/fire risks and prevention measures for the compressor.
Provides essential safety warnings and instructions before operating the unit.
Explains hazards of breathing compressed air and necessary precautions.
Discusses air tank lifespan and conditions leading to rupture.
Outlines electrical shock hazards and essential preventative measures.
Details on tire inflation safety and preventing over-inflation.
Explains the importance of proper grounding to prevent electrocution.
Warns about burns from hot compressor parts and how to avoid them.
Covers dangers of compressed air streams and flying debris.
Warns about serious injury from contact with moving compressor parts.
Highlights risks associated with improper operation and general safety.
Addresses hazards of compressor falling and how to prevent it.
Details key specifications like tank capacity, pressures, and SCFM.
Explains the function of the power switch, pressure switch, and safety valve.
Explains the function of the check valve in maintaining tank pressure.
Describes tank/outlet gauges, regulator control, and drain valve operation.
Details the thermal overload protector and how to restart the motor.
Covers unpacking, required tools, and connecting the air hose.
Guides on attaching the female tire chuck to the hose.
Steps for attaching various other air tools and accessories.
Emphasizes proper grounding and specifies extension cord requirements.
Discusses circuit protection, overheating risks, and 15 amp circuit operation.
Discusses compatibility with petroleum products and the need for air line filters.
Covers proper placement, noise reduction, and safe transportation of the compressor.
Instructions for safely moving the compressor and a pre-start checklist.
Step-by-step guide for starting the compressor and building pressure.
Procedures for safely turning off and preparing the compressor for storage.
A schedule outlining required maintenance procedures and frequency.
How to test the safety valve for proper operation.
Detailed steps for draining water and condensation from the air tank.
Information on purchasing compatible accessories and guidelines for repairs.
Defines common terms and acronyms used in the manual.
Lists common issues, their causes, and recommended corrective actions.
Addresses problems with pressure switches, air leaks, and fittings.
Information on identifying and replacing a defective air tank.
Solutions for safety valve, regulator, and air hose problems.
Troubleshooting motor overload, loose connections, and possible motor defects.
Solutions for blown fuses, tripped breakers, and voltage problems.
Explains tank pressure exceeding the pressure switch cut-in point.
