8514-238-001 REV PR page 25
IMPORTANT
TRANSIENT VOLTAGE SURGE SUPPRESSORS
Like most electrical equipment your new machine can be damaged or have its life
shortened by voltage surges due to lightning strikes which are not covered by factory
warranty. Local power distribution problems also can be detrimental to the life of
electrical components. We recommend the installation of transient voltage surge
suppressors for your new equipment. These devices may be placed at the power
supply panel for the complete installation and don’t require an individual device for each
machine.
These surge protectors help to protect equipment from large spikes and also from small
ongoing spikes in the power that occur on a day to day basis. These smaller surges can
shorten overall life of electrical components of all types and cause their failure at a later
date. Although they can’t protect against all events, these protective devices have a
good reputation for significantly lengthening the useful life of electronic components.
Electronic components are helped to have a longer useful life when they are supplied
with the clean stable electrical power they like.
We are including the following names and phone numbers of a few suppliers of these
devices for those who don’t currently have a source.
MANUFACTURER CONTACT PHONE
Innovative Technology, Inc Distributor 1-800-809-2772 or
(Part of Eaton Corporation) www.itvss.com
EFI Electronics Corporation Factory 1-800-877-1174
(Part of Schneider Electric)
MCG Surge Protection Factory 1-800-851-1508 or
www.mcgsurge.com
Advanced Protection Factory 1-800-237-4567 or
Technologies Inc. www.aptsurge.com
To Next Page
Loading...
Need help?
General
