What to do if Dexter Laundry T300 Washer machine will not accept coins?
- CChristina DavisAug 25, 2025
If your Dexter Laundry Washer isn't accepting or counting coins, check these areas: * **Coin Acceptor:** Look for blockages or damage in the coin acceptor switch. Clean, adjust, or replace it as needed. * **Power Supply:** Check circuit breakers, voltage, power leads, and power connections. * **Door Closed Safety Switch:** Verify the door closed switch at the door hinge is working correctly. * **Door Handle Closed Switch:** Ensure the single door closed switch on the left side of the door handle closes when the handle is vertical. * **Control Breaker or Fuse:** Check the breaker or fuse for continuity and replace if necessary. (Use a 1.5 amp fuse for T-300 through T-950 models, and a 2.5 amp fuse for T-1200 and T-1450 models.) * **Main PCB:** Consider replacing the main PCB.








