www.dfi .com
37
Chapter 3 BIOS Setup
Chapter 3
Power & Performance
This section is used to configure the power & performance options.
Allows more than two
frequency ranges to be
supported.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Advanced
Select Screen
Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Enabled]
[Enabled]
[Enabled]
Power & Performance
Intel(R) SpeedStep(tm)
Turbo Mode
C states
Intel(R) SpeedStep(tm)
This field is used to enable or disable the Intel Enhanced SpeedStep Technology. If
enabled, Turbo Mode will appear for configuration.
Turbo Mode
This field is used to enable or disable processor turbo mode (requires that Intel(R)
SpeedStep(tm) is enabled too), which allows the processor core to automatically run
faster than the base frequency when the processor’s power, temperature, and specifi-
cation are within the limits of TDP.
C states
Enable or disable CPU Power Management. It allows CPU to go to C states when it’s
not 100% utilized.
PCH-FW Configuration
This section configures the parameters of Management Engine Technology.
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
ME State
Manageability Features State
AMT BIOS Features
AMT Confi guration
Firmware Update Confi guration
Advanced
[Enabled]
[Enabled]
[Enabled]
Select Screen
Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
When Disabled ME will
be put into ME Temporar-
ily Disabled Mode.
ME State
When this field is set to Disabled, ME will be put into ME Temporarily Disabled Mode.
Manageability Features State
Enable or disable Intel(R) Manageability features. This option disables/enables Manage-
ability Features support in FW. To disable, support platform must be in an unprovi-
sioned state first.
AMT BIOS Features
When disabled, AMT BIOS features are no longer supported and user is no longer able
to access MEBx Setup. This option does not disable manageability features in FW.
AMT Configuration
This section is used to configure Intel(R) Active Management Technology Parameters.
Refer pages 38 and 39 for more information.
Firmware Update Configuration
This section is used to configure Management Engine Technology Parameters. Refer
page 39 for more information.
To Next Page
Loading...
Need help?
General
