DFI CS330 User Manual

www.dfi .com
64
Chapter 6 Intel AMT Settings
Chapter 6
Chapter 6 - Intel AMT Settings (CS630-Q370 only)
Overview
Intel Active Management Technology (Intel
®
AMT) combines hardware and software solution to
provide maximum system defense and protection to networked systems.
The hardware and software information are stored in non-volatile memory. With its built-in
manageability and latest security applications, Intel
®
AMT provides the following functions.
• Discover
Allows remote access and management of networked systems even while PCs are powered off;
significantly reducing desk-side visits.
• Repair
Remotely repair systems after OS failures. Alerting and event logging help detect problems
quickly to reduce downtime.
• Protect
Intel AMT’s System Defense capability remotely updates all systems with the latest security
software. It protects the network from threats at the source by proactively blocking incoming
threats, reactively containing infected clients before they impact the network, and proactively
alerting when critical software agents are removed.
Enable Intel
®
AMT in the AMI BIOS
1. Power-on the system then press <Del> to enter the main menu of the AMI BIOS.
2. In the Advanced menu, select PCH-FW Configuration.
3. Select Enabled in the AMT BIOS Features field.
Confi gure Management
Engine Technology
Parameters
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.

RC ACPI Settings

CPU Confi guration

Power & Performance

PCH-FW Confi guration

Trusted Computing

NCT6106D Super IO Confi guration

NCT6106D HW Monitor

Serial Port Console Redirection

USB Confi guration

Network Stack Confi guration

CSM Confi guration
Save & ExitChipset Security Boot
Main
Advanced
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
ME State
Manageability Features State
AMT BIOS Features

AMT Confi guration

Firmware Update Confi guration
Advanced
[Enabled]
[Enabled]
[Enabled]
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
When disabled AMT
BIOS Features are no
longer supported and user
is no longer able to access
MEBx Setup.
Note:
This option does not
disable Manageability
Features in FW.

DFI CS330 Specifications

General

Brand	DFI
Model	CS330
Category	Motherboard
Language	English