Warning labels
Warning labels are axed to make areas of danger immediately clear. The meanings of these labels are as follows.
Be sure to heed their warnings. Also, never remove the labels or allow them to become obscured.
Top
Front and Interior
Caution: Sharp Tool
The cutting tool is sharp.
Inadvertent contact may cause injury.
Never use a pneumatic blower.
This machine is not compatible
with a pneumatic blower. Cutting
waste may get inside the machine
and cause re or electrical shock.
Back
Caution: High Voltage
Removing the cover may result in
high-voltage electrical shock.
Caution: Pinching Hazard
Exercise caution to prevent ngers
from being pinched when closing
covers.
To Ensure Safe Use
8
To Next Page
Loading...
