Documentation Included with the Machine
The following documentation is included with the machine.
DE-3 Setup Guide (this document, electronic-format manual)
This manual describes how to install the machine and provides information on such matters as how to install
the included software. Be sure to read this rst. You can nd the manual as an electronic-format manual on
the included DGSHAPE Software Package CD.
DE-3 User's Manual (electronic-format manual)
This manual explains how to operate the software and how to perform engraving using this machine. The
manual is in electronic format, and no printed document is included. You can nd the manual on the
included DGSHAPE Software Package CD.
About the User's Manuals
16
To Next Page
Loading...
