DGSHAPE DE-3 - Step 2: Setting the Computers Network

Step 2: Setting the Computer's Network
* This step is not necessary when connecting to an existing LAN environment. Proceed to
P. 34 “Step 4: Conguring the Network Settings for This Machine”.
A
Log on to Windows as the computer's administrator or as a member of the
"Administrators" group.
B
Display the [Internet Protocol Version 4 (TCP/IP) Properties] window on the computer.
Windows 10
1 On the [Start] menu, click [Settings].
2 Click [Network & Internet] then [Network and Sharing Center].
3 Click [Change adapter settings] from the list on the left side of the window.
4 Right-click [Ethernet].
5 Click [Properties].
Windows 8.1
1 On the [Start] menu, click [PC settings] then [Control Panel].
2 Click [Network & Internet] then [Network and Sharing Center].
3 Click [Change adapter settings] from the list on the left side of the window.
4 Right-click [Ethernet].
5 Click [Properties].
Windows 7
1 On the [Start] menu, click [Control Panel].
2 Click [Network & Internet] then [Network and Sharing Center].
3 Click [Change adapter settings] from the list on the left side of the window.
4 Right-click [Local Area Connection].
5 Click [Properties].
Connecting to the Computer (LAN Connection)
29