DGSHAPE DE-3 - Connecting the Power Cord

D
Remove retainers B and C.
Hexagonal
wrench
Retainer B
Hexagonal
wrench
Retainer C
Storing the retainers
Store the removed retainers by attaching them to the back of this machine.
Connecting the Power Cord
WARNING
Connect to an electrical outlet that complies with this machine's ratings
(for voltage, frequency, and current).
Incorrect voltage or insu󰀩cient current may cause re or electrical shock.
WARNING
Connect to ground.
This can prevent re or electrical shock due to current leakage in the event of a
malfunction.
Installation
21