DH Instruments PPC2 AF

To Next Page

To Previous Page

PPC2 AF OPERATION AND MAINTENANCE MANUAL

MODE = 32

Echoes the special front panel display modes DISP COUNTS or DISP PERIODS if these display modes are

enabled (from the diag menu).

MODE = 64

Echoes the pneumatic table to curve interpolation data.

CURVE: Table Index, ratio, pres, rate, normalized pres, normalized rate.

MODE = 128

Echoes the low level pulse data.

PULSE: offset pulse, main pulse, offset period, main period, prescale, offset valve, main pulse valve

MODE = 256

Echoes the head calc data (if enabled).

HEAD: head calc, air density, gas density, height

MODE = 512

Echoes the user config data as it runs.

CFG: rate, direction, speed, sample#

Echoes the user config results.

CFG_RESULTS: avg rate, min, max, dir, speed

DH Instruments PPC2 AF - Page 124