Getting Started
The Random program is designed to allow the user to choose from an unlimited num-
ber of computer generated profiles.
Beginning the Program
During idle mode, the dot matrix window displays ”DB”. To begin this program, press
“Classic Program” key until “Random” program LED indicator lights up.
Accepting default values or Entering the program setup mode
When the dot matrix display shows Random program profile, it indicates you are about
to select the Random program:
• Press “Start” key to accept current default values and begin Random program
workout.
– Default Time = 30 minutes
– Default Level = a computer generated level profile with default difficulty
level = L1.
• Or press “Enter” to enter program setup mode The dot matrix & data displays
will take you through the program setup mode step by step as below: (same as
Manual program setup)
– Enter Age
– Enter Weight
– Enter Time
During the Program
As soon as the “Enter” or “Start” key is pressed, the Warm Up will be active. See Warm
Up mode section for details.
Data Display
• When Warm Up mode is completed, the data display window will display the
default workout data of “calories, speed & level”. Press “Select” button to switch
the data displays to “watts, distance & RPM”.
• Time display will show the selected program time and count down.
• Pulse display will start displaying if there is a valid pulse.
Adjustment
• Press “Level Up/Down” key to adjust the difficulty level. The level data display
will update the level and the dot matrix window will update the profile
accordingly.
Ending the Program
• When selected program time is up or Stop key is pressed, this program will end
and Cool down will be active. See Cool down section for details.
• There will be a beep sound to indicate the program ended.
Pause, Reset, Re-start or Switch a program
See Console Operating Tips section for details, page 13.
860 Er Owner’s Manual
21
Workout Programs (continued)
860erOM 6/20/06 8:42 PM Page 23
To Next Page
Loading...
Need help?
General
