Diamondback 860Er User Manual

Getting Started
The Interval program helps to build the strength of your cardiovascular system. By
alternating the workload from high to low, your heart gets an effective workout.
Beginning the Program
During idle mode, the dot matrix window displays ”DB”. To begin this program, press
“Classic Programs” key until “Interval” program LED indicator lights up.
Accepting default values or Entering the program setup mode
When the dot matrix display shows Interval program profile, it indicates you are about
to select the Interval program:
• Press “Start” key to accept current default values and begin Interval program
workout.
– Default Time = 30 minutes
– Default Level = a default level profile alternates Rest: L2 and Work
level: L10.
• Or press “Enter” to enter program setup mode The dot matrix & data displays
will take you through the program setup mode step by step as below: (same as
Manual program setup)
– Enter Age
– Enter Weight
– Enter Time
During the Program
As soon as the “Enter” or “Start” key is pressed, the Warm Up will be active. See Warm
Up mode section for details.
Data Display
• When Warm Up mode is completed, the data display window will display the
default workout data of “calories, speed & level”. Press “Select” button to switch
the data displays to “watts, distance & RPM”.
• Time display will show the selected program time and count down.
• Pulse display will start displaying if there is a valid pulse.
Adjustment
• Press “Level Up/Down” key during Rest segment to adjust the level from L2. The
level of the remaining Rest segments will be updated to the new setting and the
dot matrix window will update the intensity profile accordingly as well.
• Press “Level Up/Down” key during Work segment to adjust the level from L10.
The level of the remaining Work segments will be updated to the new setting
and the dot matrix window will update the intensity profile accordingly as well.
Ending the Program
• When selected program time is up or Stop key is pressed, this program will end
and Cool down will be active. See Cool down section for details.
• There will be a beep sound to indicate the program ended.
Pause, Reset, Re-start or Switch a program
See Console Operating Tips section for details, page 13.
22
860 Er Owner’s Manual
Workout Programs (continued)
860erOM 6/20/06 8:42 PM Page 24

Diamondback 860Er Specifications

General

Brand	Diamondback
Model	860Er
Category	Elliptical Trainer
Language	English