• 9 •
FEATURES 10.
ASSEMBLY INSTRUCTIONS11.
It is important to fully assemble your charger before use. Follow these
instructions for assembly:
PARTS TOOLS NEEDED
Two, 10-32, thread cutting screws
Four, 1/4-20, thread cutting scews
Two wheels
One axle
Two axle caps
Two axle brackets
One handle
One mounting foot
3/8” wrench (for mounting foot)
5/16” wrench (for wheels)
Hammer
Phillips screwdriver
Output Selector Switches1.
Ameter2.
Clamps3.
Wheels4.
To Next Page
Loading...
